top of page
PRE-PRINTED AIRFRAMES
LET US DO THE PRINTING- BE READY TO FLY IN HOURS
FULLY PRINTED AIRCRAFT IN THE BOX. READY TO SHIP.
BLACK FRIDAY SPECIAL!
LISTINGS
2/1 available
2. 74X-i2A EXTENDED DECK- WINGLETS- FIXED GEAR (PRINTED PARTS ONLY)
74X-i2A EXTENDED DECK- WINGLETS- FIXED GEAR (PRINTED PARTS ONLY)
COLORFABB NATURAL & GREY LW-PLA (MAJORITY)
VINYL WINDSCREEN GRAPHIC
LW-ASA HEAT RESISTANT MOTOR LEAD PLUG SET
CLEAR PLA LANDING & NAV LED LENSES
STEEL SPRINGS FOR HATCH LATCH & NOSE GEAR SHOCK
FULL LANDING GEAR SET
NO BEARINGS
NO FASTENERS
NO OTHER HARDWARE
SOME PARTS NEED POST PRINT CLEAN UP
AIRCRAFT NEEDS HARDWARE, ELECTRONICS & RADIO SYSTEM.
PLEASE SEE BOM & PARTS LIST UNDER THE "BUILD RESOURCES" TAB FOR PART INFO.
SEE RC GROUPS FORUM FOR BUILD DOCUMENTATION. YOU MAY ALSO CONTACT US ANYTIME FOR BUILD HELP.
Important Info Before Purchasing
-
THIS PRODUCT CONTAINS 3D PRINTED PARTS ONLY. SOME HARDWARE OR ELECTRONICS MAY BE INCLUDED IN SOME LISTINGS & WILL BE LISTED.
-
AIRFRAMES HAVE SHIPPED SUCCESSFULLY AROUND THE WORLD THUS FAR:
Please remember - Parts can be damaged during shipping. We will take great care of you if any parts are damaged in shipping and we'll work to make it right to the best of our ability given the circumstances. Please be aware- We are not financially responsible to cover or refund the costs of shipping under any circumstances.
-
BY PURCHASING, YOU AGREE TO OUR TERMS OF SERVICE.
PROMOTIONAL DISCOUNT
74X-i2A EXTENDED DECK- WINGLETS- FIXED GEAR (SOME HARDWARE INCLUDED)
COLORFABB NATURAL & GREY LW-PLA (MAJORITY)
4 X 50MM EDF FANS INCLUDED ( CW/ CCW)
8mm CARBON TUBES INCLUDED FOR WINGS AND CENTER FUSELAGE (CUT TO LENGTH)
3MM CARBON BRACES FOR NOSE GEAR MOUNT- INSTALLED
NOSE SECTION DETACHABLE MAGNETIC HATCH- INSTALLED
FUSELAGE SECTIONS F1 to F5B / FORWARD & CENTER FUSELAGE- ASSEMBLED
BATTERY VELCRO TIE DOWNS -INSTALLED
ELEVATORS ASSEMBLED & INCLUDE 3mm HINGE PINS
LEFT WING PYLON MOUNTS INSTALLED
VINYL WINDSCREEN GRAPHIC
LW-ASA HEAT RESISTANT MOTOR LEAD PLUG SET
CLEAR PLA LANDING & NAV LED LENSES
STEEL SPRINGS FOR HATCH LATCH & NOSE GEAR SHOCK
FULL LANDING GEAR SET W/ CARBON NOSE STRUT (8mm) & ELASTIC TRUCK TENSIONERS
NO BEARINGS
NO FASTENERS
NO OTHER HARDWARE
SOME PARTS NEED POST PRINT CLEAN UP
AIRCRAFT NEEDS HARDWARE, ELECTRONICS & RADIO SYSTEM.
PLEASE SEE BOM & PARTS LIST UNDER THE "BUILD RESOURCES" TAB FOR PART INFO.
SEE RC GROUPS FORUM FOR BUILD DOCUMENTATION. YOU MAY ALSO CONTACT US ANYTIME FOR BUILD HELP.
SOLD
Shipping Quote
bottom of page